What a COA actually proves, and the three things to check
A certificate of analysis is a record about one batch, not a guarantee about your vial. Here is what HPLC, mass spectrometry and LAL each measure, and the three lines worth reading before any purity percentage.
A certificate of analysis proves less than most people assume. It is a record about one batch, issued by the company responsible for it. Here is what the tests measure, and the three lines worth reading before any purity percentage.
Do you just ask for a COA?
A reader put the usual question like this:
“how do u even know who’s legit and who’s not. … do u guys usually ask for a COA or is there more to it??”
There is more to it. The IPEC Federation’s 2024 COA Guide — written for pharmaceutical manufacturers — describes a COA as a document that “demonstrates that the batch conforms to the defined specifications.” In the same breath it warns: “It should not be used in lieu of appropriate qualification of the supplier.”
That second sentence is the important one. Even professional drug manufacturers, buying from suppliers they audit, are told a certificate is not a substitute for knowing who made the material. IPEC says manufacturers “should review and verify the COA during the excipient manufacturer qualification process,” and that COA data can support releasing a batch only “if the excipient manufacturer is fully qualified.” The paper is trusted because the supplier has been checked, not the other way round.
Is a COA proof for the buyer?
Another reader had the logic right:
“A COA is a quality control document. … The only COA that works as proof for the buyer is one you sent in yourself, from a vial you bought”
A certificate is a record about a batch, not a guarantee about your vial. It says a sample drawn from a lot, at a point in time, gave certain results. It cannot say that your vial came from that lot, that it was stored properly since, or that the document belongs to the product it is sent with. Those gaps are filled by trust in the supplier — which is why IPEC puts supplier qualification first.
If the lot number on the paper does not match the vial, you are holding a record about something else. Matching lots is the start of reading a COA, not the end of it.
What the tests actually measure
A third reader named the three tests that matter:
“Looking for real experiences with domestic labs that do HPLC/MS purity + LAL endotoxin testing.”
Each test answers a different question, and none answers the others.
HPLC (high-performance liquid chromatography) — how pure is the detected material? The sample is pushed through a column that separates its components, and a detector records each as a peak. Purity is usually reported as the main peak’s share of the total peak area. What HPLC does not tell you is what the main peak *is*. It measures how much of the detected signal belongs to one thing, not which thing that is. It also does not tell you how much powder is in the vial. Water, salts and counter-ions can add weight without showing up as a separate peptide peak.
Mass spectrometry (MS) — is it the right molecule? MS measures the mass of the molecules in the sample. If the measured mass matches the expected peptide, that is evidence of identity. It is the test that supports the claim that the main HPLC peak is the compound on the label. “99% pure” without a mass result is 99% of something unnamed.
LAL (Limulus amebocyte lysate) — endotoxin. Endotoxins are fragments of bacterial cell walls. They survive processes that kill bacteria, so a product can be sterile and still carry them. LAL detects them. Purity and identity tests will not.
Why purity without identity is a trap: a COA that reports “99% purity” by HPLC with no mass spectrometry tells you the sample is, by that method, 99% one substance. It does not tell you that substance is the one you were promised. A wrong peptide, made cleanly, passes a purity-only test with flying colours. Purity and identity together are the minimum. Endotoxin is a separate question again.
Real numbers, not “pass”
IPEC is direct about how results should be written: “Reporting of actual data and observations is recommended rather than non-specific ‘passes’ or ‘conforms’ statements unless the test is qualitative.” A results column that reads “conforms” all the way down tells you a box was ticked, not what was found. Look for a number, a unit, and the acceptance criterion it was measured against.
The same habit applies to methods. IPEC expects each result to carry a “reference to the test method.” You do not need to be a chemist to notice whether a method line exists.
The three things to check
The IPEC guide sets out what a proper COA contains. Three items matter most for anyone holding a vial and a PDF.
1. A batch number that matches. IPEC: “A batch number or other means of uniquely identifying the material quantity covered by the COA” should be present, and it should be “traceable to a specified batch.” If the number on the paper is not the number on the vial, the paper is about something else.
2. Who actually made it. IPEC: “The original manufacturer and manufacturing site should be identified if different from the supplier and supplier location.” It adds: “It is essential that the manufacturer be known to the user.” A certificate that names no manufacturer and no lab is a document nobody can check.
3. Dates and a signature. IPEC lists “Date of manufacture,” an “Expiration or retest date (as applicable) or stability statement,” and the “Identity of authorized individual for approval or electronic signature statement with traceability to signatory.” No date and no named signer means no one is standing behind it.
Those three checks will not tell you a product is right for anyone to use. They will tell you whether you are looking at a real batch record or a page that only borrowed the layout of one.
Can I get it tested myself?
“I have a COA already but want to get the peptide tested myself too. Is there anywhere in Canada that does this?”
A test answers one question: what was in this sample? That is useful, and it is the only way to close the gap between a batch record and your vial. But it says nothing about the vial next to it, about how the product will be stored from here, or about whether it is right for anyone to use. If you do test, ask for purity, identity and endotoxin together, because one alone answers less than it seems to.
Frequently asked questions
Does 99% purity mean 99% of the powder’s weight is the peptide?
No. HPLC purity is almost always a peak-area ratio: the main peak as a share of the peaks the detector recorded. Net peptide content, when it is reported, is a different measurement. It asks how much of the powder’s weight is peptide rather than water or counter-ions. A sample can have a high purity figure and a much lower content figure, and both results can be honestly measured.
Is a COA with only HPLC enough?
It is not enough to identify the material. HPLC without mass spectrometry leaves open the possibility that the main peak is the wrong molecule. Identity and purity answer different questions.
What if every result simply says “conforms”?
IPEC recommends actual data rather than non-specific “passes” or “conforms” statements unless the test is qualitative. A number you can read is stronger than a tick mark.
Does a matching lot number prove my vial was the sample that was tested?
No. It proves the document claims to cover the same batch. A batch is larger than one vial. The certificate describes a sample drawn from that batch, not a separate test of every container.
Sources
Quotations in this article are from the IPEC Federation, *Certificate of Analysis Guide for Pharmaceutical Excipients*, 2024 edition, opened and text-searched on 9 November 2026: https://www.ipec-europe.org/uploads/publications/2024-coa-guide-f-1720781885.pdf
The lot-matching step is also the heart of whether parcel paperwork agrees with itself. For the checks that sit around the paper, see how to tell a real supplier from a fake one. A more technical companion is how to read a peptide COA.
When the vial actually arrives, the same three-line check applies whether the box landed in Winnipeg, Saskatoon or Edmonton. Those pages cover porch cold and community mailboxes; they do not replace reading the certificate.
Ask Kobi
Got a peptide question? Kobi runs a free Canadian peptide info line: Message Kobi on WhatsApp.
Have a COA and a vial and want a second look at whether the batch numbers line up? Send him both.
Research peptides. Minus the hype.
How our own batches are checked: third-party tested peptides in Canada, with the labs, the methods and how batch COAs work for members.
Key takeaways
- A certificate of analysis is a record about one batch, not a guarantee about your vial.
- HPLC measures how pure the detected material is; mass spectrometry supports identity; LAL looks for endotoxin.
- Check that the lot matches the vial, that the manufacturer and lab are named, and that the document is dated and signed.
We source from distributors whose batches are third-party tested for HPLC purity and measured content. Certificates of Analysis (COAs) are for members only.